Underwater Electric Field Sensor for UXO Detection
MR-2108
Objective
Time domain electromagnetic (TDEM) detection is a common method in unexploded ordnance (UXO) remediation. It is able to detect targets and can also be used to discriminate them from scrap. Traditionally TDEM employs magnetic sensors to measure induced eddy currents in a target. This method has proved effective for both land- and water-based applications. Employing electric (E) field sensors for underwater UXO detection is a new concept. The lack of practical-use, low-noise E-field sensors has limited the size of the community familiar with underwater E-field sensing and its related system and noise cancellation issues. In particular, capacitively coupled E-field sensing is new and has only been demonstrated to date for frequencies up to 30 Hz.
- Adapt the existing electrode amplifier to operate in the band of 100 Hz to 10 kHz, with a sensitivity of 10 nV/rtHz.
- Design and build a 3-axis underwater E-sensor with 10-cm baseline in addition to constructing a seawater-based UXO test-bed.
- Measure TDEM signals from a UXO target with the underwater E-sensor and compare them to traditional B-field measurements and calculated values.
Technical Approach
The system was based around an existing TDEM sensor, in which a pulsed magnetic (B) field induced eddy currents in the target. The eddy currents produced a secondary B-field, which in a conducting medium was detected with either E-sensors or B-sensors. An E-sensor was used to measure decaying eddy currents in a standard UXO-like target. The results were compared to both previously measured B-fields and calculated values for the same target.
Results
The E-sensor showed similar response to the B-sensor, with roughly one third the signal-to-noise ratio (SNR) but a broader detection range. The E-sensor data from a steel rod were in excellent agreement, in both shape and amplitude, with the calculated value for a vertical magnetic dipole of moment 0.03 Am2.
Benefits
The UXO detection capability of the underwater E-sensor was clearly demonstrated. The vector nature of the fields also suggests the sensor could be used for discrimination, using inversion algorithms such as the Time Domain 3-Dipole Model. In future work, the detection capability of this sensor will be enhanced and the discrimination potential will be explored.
Project Documents
Points of Contact
Principal Investigator
Dr. Yongming Zhang
QUASAR Federal Systems
Phone: 858-412-1737
Fax: 858-228-1002
Project Documents
Document Types
- Fact Sheet - Brief project summary with links to related documents and points of contact.
- Final Report - Comprehensive report for every completed SERDP and ESTCP project that contains all technical results.
- Cost & Performance Report - Overview of ESTCP demonstration activities, results, and conclusions, standardized to facilitate implementation decisions.
- Technical Report - Additional interim reports, laboratory reports, demonstration reports, and technology survey reports.
- Guidance - Instructional information on technical topics such as protocols and user’s guides.
- Workshop Report - Summary of workshop discussion and findings.
- Multimedia - On demand videos, animations, and webcasts highlighting featured initiatives or technologies.
- Model/Software - Computer programs and applications available for download.
- Database - Digitally organized collection of data available to search and access.
